1L Mobil DTE Oil Heavy/Medium
Other sizes available
Mobil DTE Oil Heavy/Medium is an ISO VG 68 grade Circulating Oil.
The Mobil DTE Oil Named Series of lubricants are premium performance circulating lubricants designed for applications including steam and hydro turbine sets and other systems where long lubricant service life is required.
Mobil DTE Oil Named Series lubricants are formulated from highly refined base stocks and an additive system which provide an extremely high level of chemical and thermal stability, rapid and complete separation from water and a high resistance to emulsification. They provide excellent protection against rust and corrosion, including resistance to salt water, and good antiwear properties. They have a high viscosity index which ensures minimum variation of film thickness with temperature and minimum power loss during the warm up period. These grades have excellent air release properties which allow entrained air to separate, thus avoiding pump cavitation and erratic operation.
Bridgeport specify Mobil Vactra Heavy/Medium for use in the following applications on their mills
- J Head - Pulley Cam, Spindle Bearing/Quill Feed, Quill Bearings
- 2J/2J2 Head - Spindle Down Feed, Drawbar Splines
- Mechanical Table Feeds - Drive Bevel gears, Wormsheel and Change Gears
- M Head - Spindle Bearings
- E Head - Ram and Connecting Rod
Mobil Vactra Heavy/Medium is an ISO VG 68 grade R&O lubricating oil which is no longer in production. The modern day equivalent oil from Mobil that can be used instead is Mobil DTE Oil Heavy/Medium which can be used wherever Mobil Vactra Heavy/Medium is specified. Do not confuse this oil with Mobil Vactra Oil No.2 which is a slideway oil, and very different.
- DIN 51515-7
- DIN 51517
- DIN 51524
- Cincinnati Milacron P-54
Cincinnati Milacron P-54
Cincinnati Milacron are an American machinery manufacturer. To simplify specification of machine oils for their machines, they adopted an approved products list, grouping oils from various manufacturers into categories with minimum specifications. Instead of specifying one particular manufacturer of oil for their machines, they suggest you choose an oil from the approved products list in the relevant category.
This oil appears in the P-54 category. The following oils are also approved under the P-54 category. If an oil is present on this list, it is a good indication that it is of similar specification to this oil, and could possibly be substituted, however, additional checks should be made with the manufacturers data sheets before substituting.
- Ace Lube R&O 300
- American Oil & Supply PQC-15 R&O
- Amoco Industrial Oil 68
- Anderson Windsor Hydraulic Oil 52
- Ashland Petroleum ETC R&O 30
- Atlantic Richfield Duro 68
- BP Energol HLP-68
- BP Energol HL-68
- Breslube R&O 68
- Calvary Chemical CAL-LUBE 350
- Cam-Or 83-814
- Chevron GST Oil 68
- Cities Service Citgo Pacemaker 68
- Conoco Turbine Oil 68
- Conoco Dectol R&O 68
- Engineered Lubricants Enlube 130
- Esso Teresstic 68
- Esso Teresso 68
- Gulf Harmony 68
- Imperial Oil Molub-Alloy A-945
- Indian Oil Servocirol 17
- International Refining Irmco HL-30
- Luscon Hydralube 68
- Mobil DTE Oil Heavy/Medium
- Mobil Vactra Heavy/Medium
- Motors Oil Refining Morco Heavy/Medium Hydraulic Oil
- Opcon H-68 R&O
- Petrofina Fina Cirkan 68
- Henry Sanson & Sons No Gum Hydraulic Oil 20
- Shell Turbo 68
- Sun Sunvis 931
- Texaco Regal R&O 68
- Union Unax RX 68
- Union Turbine Oil XD-68
- Vulcan 215 SP
- W.S Dodge Deolube 350-S
Please check your machine manual for the correct oil specified and ensure you are buying the correct grade of oil for your machine.
If your machine manual specifies a grade of oil that you are finding it difficult to get, then please do get in touch, as we may be able to source it and add it to our stock list.
|Country of Manufacture||France|
|Base Oil Type||Mineral Oil|
|Viscosity||ISO VG 68|